All Shield Wb Modified Silane-Siloxane Concrete Protectant

Description

All Shield WB is a low-VOC, water-based concrete and stone protectant that resists oil, water, and stains on interior and exterior surfaces

All Shield WB is a synthetic-modified silane-siloxane protectant that penetrates concrete, brick, pavers, and natural or synthetic stone, bonding directly with the substrate. Rather than forming a surface film, it creates an invisible barrier that resists moisture, oil, food stains, and deicing salts while preserving the surface’s natural look and breathability.

Key Features & Benefits

• Excellent oil, water, and stain repellency for interior and exterior surfaces
• Low-VOC formula, compliant with SCAQMD, OTC, and LADCO regulations
• Long-lasting protection for both new and existing concrete and stone
• Dries quickly to a tack-free, skid-resistant finish
• Water-based, colorless, and non-yellowing
• USDA approved for indirect food contact areas

Common Applications

Suited for commercial and industrial floors, automotive service areas, driveways, pavements, brick, concrete pavers, parking structures, bridges, and marine platforms.

Application Instructions

• Apply generously with a low-pressure sprayer
• Use proper respirator and ventilation during application
• New concrete should cure a minimum of 21 days before application
• Substrate must be clean, dry, and free of oil or other contaminants
• Agitate the product well before each use
• Coverage varies based on surface porosity — refer to the Technical Data Sheet or contact SpecChem for project-specific coverage guidance

Technical Data Summary

• Composition: Modified fluoropolymer, silane/siloxane blend
• Appearance: Water clear
• Flash Point: Greater than 200°F
• UV Resistance: Excellent
• Shelf Life: 12 months

Packaging

Available in 1-gallon jugs (4 per case), 5-gallon pails, and 55-gallon drums.

Cleaning & Maintenance

Clean spills promptly with clean water or a pressure washer. For tougher stains, a diluted solution of SpecChem Orange Peel or Berry Clean followed by a clean water rinse is recommended.

Supporting Documents

Safety Data Sheet (SDS)

Technical Data Sheet (TDS)