Tempered Glass 9H Screen Protector for Tesla Model 3 / Y

What 9H means

A scratch-resistance rating, not an impact guarantee.

9H refers to pencil-scale surface hardness. It helps shield the display from everyday abrasion and cleaning marks, while the bonded glass adds a sacrificial layer above the factory screen.

Realistic protection

No screen protector makes a display unbreakable. Severe edge impact, concentrated force or incorrect installation can still damage the protector or the original screen.

Install on a clean, cool screen

Dust control matters more than speed.

1. Power downPark safely, turn off the display and work away from direct sun or moving air.
2. Clean fullyUse the wet wipe, dry wipe and dust stickers until no lint or particles remain.
3. Dry-align firstConfirm orientation and equal edge spacing before exposing the adhesive side.
4. Lower and finishSet one edge, lower gradually and press remaining air toward the nearest edge with a soft cloth.

Do not force a poor match.

If the corners, camera/sensor area or perimeter do not align before adhesion, stop and recheck the vehicle generation and selected product.

In the box

Everything needed for one careful installation.

• 1 × Tesla screen protector
• 1 × wet and dry cleaning-wipe set
• 1 × dust-removal sticker set
• 1 × installation guide

Before you order

Screen protector FAQ

No. This listing is for the original 15.6-inch display used by Model 3 2017–Oct. 2023 and pre-refresh Model Y 2020–2024.

Choose Matte to reduce reflections and fingerprint visibility; choose HD if retaining maximum clarity and the original glossy look is the priority.

The protector is designed for normal touchscreen use. Clean alignment and full adhesion are important; trapped dust or an unseated edge can affect the experience.

No. 9H is a surface-hardness rating related mainly to scratch resistance. It is not a guarantee against every impact or pressure event.

Confirm fitment and finish before removing protective liners. Installed, used or damaged protectors may not qualify for return; review the current refund policy before installation.

Fitment → finish → clean install

Verify the 15.6-inch screen, then choose Matte or HD.

Choose your finish

15.6-inch legacy center display

Protect the screen you use for almost everything.

A model-specific 9H tempered-glass layer for the original Model 3 and pre-refresh Model Y center display, available in low-glare Matte or clarity-first HD.

• 9H surface hardness
• Matte or HD
• Touch-compatible
• Cleaning kit included

Fitment first

The 15.6-inch screen shape—not the Tesla badge—decides compatibility.

This listing has one vehicle-size option. Confirm the screen and production generation before choosing Matte or HD.

Measure if the vehicle sits near a changeover date.

Model year labels can overlap production transitions. Compare the display outline and listed 15.6-inch size before removing the protective film or beginning installation.

Choose the viewing experience

Matte reduces reflections. HD preserves the glass-like look.

Matte

Lower-glare surface

Better suited to drivers who want softer reflections and less visible fingerprinting. The trade-off is a slightly diffused, less glossy image.

HD clear

Clarity-first surface

Keeps the display closer to its original contrast and gloss. Reflections and fingerprints can remain more visible under strong light.

What 9H means

A scratch-resistance rating, not an impact guarantee.

9H refers to pencil-scale surface hardness. It helps shield the display from everyday abrasion and cleaning marks, while the bonded glass adds a sacrificial layer above the factory screen.

Realistic protection

No screen protector makes a display unbreakable. Severe edge impact, concentrated force or incorrect installation can still damage the protector or the original screen.

Install on a clean, cool screen

Dust control matters more than speed.

1. Power downPark safely, turn off the display and work away from direct sun or moving air.
2. Clean fullyUse the wet wipe, dry wipe and dust stickers until no lint or particles remain.
3. Dry-align firstConfirm orientation and equal edge spacing before exposing the adhesive side.
4. Lower and finishSet one edge, lower gradually and press remaining air toward the nearest edge with a soft cloth.

Do not force a poor match.

If the corners, camera/sensor area or perimeter do not align before adhesion, stop and recheck the vehicle generation and selected product.

In the box

Everything needed for one careful installation.

• 1 × Tesla screen protector
• 1 × wet and dry cleaning-wipe set
• 1 × dust-removal sticker set
• 1 × installation guide

Product-specific evidence

Feedback comes from this protector—not a storewide rating.

The review module on this product page showed an average of 4.8 out of 5 from 42 reviews when checked in September 2026. Read the newest reviews for current comments on fit, finish choice and installation.

4.8 / 542 product reviews · checked Sep. 2026

Before you order

Screen protector FAQ

No. This listing is for the original 15.6-inch display used by Model 3 2017–Oct. 2023 and pre-refresh Model Y 2020–2024.

Choose Matte to reduce reflections and fingerprint visibility; choose HD if retaining maximum clarity and the original glossy look is the priority.

The protector is designed for normal touchscreen use. Clean alignment and full adhesion are important; trapped dust or an unseated edge can affect the experience.

No. 9H is a surface-hardness rating related mainly to scratch resistance. It is not a guarantee against every impact or pressure event.

Confirm fitment and finish before removing protective liners. Installed, used or damaged protectors may not qualify for return; review the current refund policy before installation.

Fitment → finish → clean install

Verify the 15.6-inch screen, then choose Matte or HD.

Choose your finish